Forum Replies Created

Viewing 15 posts - 1 through 15 (of 5,588 total)
  • Author
    Posts
  • Xceed Support
    Member
    Post count: 5658

    Do you get the same exceptions using the latest version of the component (5.8) from our website?

    Applies to Xceed SFTP for .NET. Imported from legacy forums. Posted by Jb [Xceed] (had 59 views)

    Xceed Support
    Member
    Post count: 5658

    You will find the description of the header and footer around the compressed data here.

    However, this should not be needed. If you used the Deflated compression method, Uncompress() will detect the end of the compressed data itself even if the source buffer you supply is larger than the compressed data. This works because the Deflated compression format contains internal block markers that allow the engine to detect when decompression needs to end.

    Understand that this approach will only work if the entire compressed data is located in a single compressed buffer. This means that when you call Uncompress(), the endOfData parameter value will be ‘true’.

    Imported from legacy forums. Posted by Jb [Xceed] (had 344 views)

    Xceed Support
    Member
    Post count: 5658

    Hi Peter,

     

    We were able to reproduce the issue at our end and we started investigating it. However, in the meantime, you could find a copy of the product’s  documentation on our  “Documentation Center” at the following link:

    http://doc.xceedsoft.com/products/XceedWpfDataGrid/

    Imported from legacy forums. Posted by Alain [Xceed] (had 472 views)

    Xceed Support
    Member
    Post count: 5658

    A new build has been posted. Here are the changes made:

    Fixed a bug where files could not be deleted after having been opened by
    SFtpFile. The handles were not closed properly.

    Applies to Xceed SFTP for .NET. Imported from legacy forums. Posted by Jb [Xceed] (had 1076 views)

    Xceed Support
    Member
    Post count: 5658

    A new build has been posted. Here are the changes made:

    • Can now connect to SSH servers that use DSS (DSA) keys longer than 1024 bits up to a limit of 3072 bits.
    • The SSHClient.Timeout property now applies to SSH identification
      string sequence. This eliminates the behavior where the component
      freezes if the server doesn’t send an ID string. Instead, it will now
      throw a SSHTimeoutException after the timeout value elapses.
    • Added the SSHClient.TimeoutSeconds property. It is a utility
      property that allows to set the timeout value in seconds instead of
      miliseconds.
    • The SSHClient class now implements the IDisposable interface. This
      means you are encouraged to use SSHClient as part of a ‘using’
      statement. SSHClient.Dispose() makes sure to Disconnect() from the
      server (if applicable).
    • The HostKeyReceivedEventArgs.HostKeyMD5FingerprintString property
      now uses the very common ‘:’ character as a separator instead of ‘-‘.
      This makes string comparisons with your own MD5 fingerprint strings
      easier to make.

    Applies to Xceed SFTP for .NET. Imported from legacy forums. Posted by Jb [Xceed] (had 641 views)

    Xceed Support
    Member
    Post count: 5658

    Fixed a bug where the timeout value used was 30s when performing some
    commands e.g. Authenticate() even when the Timeout property was set to a
    different value.

    Applies to Xceed FTP for .NET. Imported from legacy forums. Posted by Jb [Xceed] (had 1469 views)

    Xceed Support
    Member
    Post count: 5658

    Posted build 12606.0 for versions 4.4 and 5.2 for keyboard-interactive support.

    Applies to Xceed SFTP for .NET. Imported from legacy forums. Posted by Jb [Xceed] (had 703 views)

    Xceed Support
    Member
    Post count: 5658

    If you are referring to public key authentication, yes it is supported. I posted explanations and an example here.

    Applies to Xceed SFTP for .NET. Imported from legacy forums. Posted by Jb [Xceed] (had 950 views)

    Xceed Support
    Member
    Post count: 5658

    Any member that is available on a StatCell available here: http://doc.xceedsoft.com/products/XceedWpfDataGrid/Xceed.Wpf.DataGrid.v4.3~Xceed.Wpf.DataGrid.StatCell_members.html

    In your case, I guess it would be Background, BorderBrush, BorderThickness and Tooltip.

    If you use your own Template, you can also specify any properties that are available within that template.

    Imported from legacy forums. Posted by Sebastien [Xceed] (had 315 views)

    Xceed Support
    Member
    Post count: 5658

    Hi James, 

     

    Try putting a DataTrigger linked to the data of the StatCell to modify the display of the statCell as desired.  

    It should look something like this:

            <DataTrigger Binding=”{Binding RelativeSource={RelativeSource Self}, Path=(xcdg:DataGridControl.StatContext).myStat_ResultPropertyName}” Value=”100″>

                <Setter Property=”MyProperty” Value=”MyValue”/>

            </DataTrigger>

     

    I hope it will helps you with your project. 

    Imported from legacy forums. Posted by Sebastien [Xceed] (had 211 views)

    Xceed Support
    Member
    Post count: 5658

    Hi james,

     

    Can you send me a little demo project so I can have a better look of what you are trying to do please?

     

     Thanks 

    Imported from legacy forums. Posted by Sebastien [Xceed] (had 176 views)

    Xceed Support
    Member
    Post count: 5658

    Hi james, 

     

    To return a custom validation message, you’ll need to return
            new
    ValidationResult(
    false, “My custom message.” );
    in the validation function in the code-behind.

     

    For more information, you may check the example here:
    http://doc.xceedsoft.com/products/XceedWpfDataGrid/Xceed.Wpf.DataGrid.v4.3~Xceed.Wpf.DataGrid.ValidationRules.CellValidationRule.html

     

     If this doesn’t help you, can you please provide us of a snippet or a little demo project so we can have a better grasp of what you are trying to do? 
    Thanks

    Imported from legacy forums. Posted by Sebastien [Xceed] (had 632 views)

    Xceed Support
    Member
    Post count: 5658

    Hi,
    Some of theses options are already available within the filterRow. As an example, it is possible to insert querries like “<1024” or “>=30” to numeric values.

     However, if filterRow doesn’t correspond your needs, here is some informations to create your own Custom Filter:

    To create a custom auto-filter control this page within our documentation should provide you with enough information to help you.
    http://doc.xceedsoft.com/products/XceedWpfDataGrid/Custom_Auto-filtering_Controls.html

    To add custom rules within our DataGridControl, please use the DataGridCollectionView’s Filter attribute.

            DataGridCollectionView view = MyDataGridControl.ItemsSource as DataGridCollectionView;
            view.Filter = i => FilterFunction((System.Data.DataRowView)i));

        static protected bool FilterFunctionSystem.Data.DataRowView currentRow) //Of course, you may add as many parameters you wish
        {
            //Contents of the filter function.
        }

    Imported from legacy forums. Posted by Sebastien [Xceed] (had 1067 views)

    Xceed Support
    Member
    Post count: 5658

    Hi Jay,

    Since we don’t know how your data works in your code behind, we will first presume that the “ProductData” object is coming from a database result.

    To remedy your problem, we suggest that you try one of the two following solutions:

       Path=CurrentItem[‘ProductName’]
    Or
       Path=CurrentItem[0] (Zero being the index of the column you wish to access)

    However, if “ProductData” in the code behind was simply an object, try this instead:

       Path=CurrentItem.ProductName

     

    Imported from legacy forums. Posted by Sebastien [Xceed] (had 1167 views)

    Xceed Support
    Member
    Post count: 5658

    Depending on which type of View you are using on the DataGridControl, there are two ways of doing what you wish.

    For the TableView, simply set the Style of the DataRow elements to have the Height you need.

       <Style TargetType=”{x:Type xcdg:DataRow}”>
          <Setter Property=”Height” Value=”40″ />
       </Style>

    For the TableflowView, set its ContainerHeight value to the desired height.

       <xcdg:DataGridControl.View>
          <xcdg:TableflowView ContainerHeight=”40″ />
       </xcdg:DataGridControl.View>

    I hope theses code examples will help you in what you need.

     

    Imported from legacy forums. Posted by Sebastien [Xceed] (had 1385 views)

Viewing 15 posts - 1 through 15 (of 5,588 total)